Airmar
-
SS260 Thru-Hull Transducer
Airmar SS260 stainless steel thru-hull transducers 6 pin 50/200 kHz dual frequency and includes high speed fairing block. Works with Simrad NXxx, Northstar M-Series units.
-
External Diplexer
Airmar External Diplexer, Diplex-MM and Diplex-Ray allow dual-transmission-line transducers to be converted for use with single-transmission-line sounders. For example, the DIPLEX-MM can be used to convert a dual-transmission-line transducer from BSM-2, BBFF3 or DFF3 into a singletransmission- line for use with Furuno, Garmin, Simrad, Navman, Northstar, Lowrance, Si-Tex, and other fishfinders. The DIPLEX-RAY is used for converting a dual-transmission-line transducer for use with Raymarine sounders only.
-
NMEA 0183 Cable
Airmar NMEA 0183 Cable for use with Airmar NMEA 0183 instruments. One end has an Airmar 9-pin connector that fits onto the base of the instrument, and the other end has an 8-pin plug for the Airmar USB combiner or converter. This plug can be removed if the instrument is to be connected directly to an NMEA 0183 display or other device.
-
NMEA 2000 Cable
Airmar NMEA 2000 Cable 5 Pin for use with Airmar NMEA 2000 instruments. One end has an Airmar 9-pin connector that fits onto the base of the instrument, and the other end has a standard male NMEA 2000 plug to connect to a network.
-
H2183 High Performance Heading Sensor
Airmar H2183 High Performance Marine Heading Sensor whether you are offshore fishing or just enjoying family time on the water, feel confident and comfortable that the H2183 is your reliable source for heading information. The solid-state three-axis compass, combined with Airmar’s additional advanced sensors and software provide unparalleled performance.
-
GH2183 GPS Heading Sensor
Airmar GH2183 combines GPS positioning and highly accurate heading information in one compact antenna. The GH2183 eliminates the need to install a GPS antenna above deck and a heading sensor below deck. Only one installation above the deck is required, saving installation time and money.
-
SS264 50-200kHz Narrow-Wide Beam 20 Degree
Airmar SS264 50-200kHz Narrow-Wide Beam narrow-beam broadband 200 kHz transducer will give you excellent resolution and crisp image detail needed for bottom fishing. The SS264 low ringing of this transducer is perfect for finding fish holding tight to the bottom and other structure. The seven-element 50 kHz transducer is the same as in the SS264W and is best for deep-water sounding down to 914 m (3,000’).
-
SS264 50-200kHz Narrow-Wide Beam 12 Degree
Airmar SS264 50-200kHz Narrow-Wide Beam narrow-beam broadband 200 kHz transducer will give you excellent resolution and crisp image detail needed for bottom fishing. The SS264 low ringing of this transducer is perfect for finding fish holding tight to the bottom and other structure. The seven-element 50 kHz transducer is the same as in the SS264W and is best for deep-water sounding down to 914 m (3,000’).
-
SS264 50-200kHz Narrow-Wide Beam 0 Degree
Airmar SS264 50-200kHz Narrow-Wide Beam narrow-beam broadband 200 kHz transducer will give you excellent resolution and crisp image detail needed for bottom fishing. The SS264 low ringing of this transducer is perfect for finding fish holding tight to the bottom and other structure. The seven-element 50 kHz transducer is the same as in the SS264W and is best for deep-water sounding down to 914 m (3,000’).
-
DT800 Smart Sensor NMEA 2000 Nylon
Airmar DT800 Smart Sensors nylon plastic thru-hull features embedded micro-electronics. Airmar DT800 depth and temperature signals are processed inside the sensor and can be displayed on any radar, chart plotter, or device that accepts NMEA 2000 data.
-
R209 Broadband 2-3 kW Transducer
Airmar R209 Broadband 2-3 kW Transducer can operate at ANY frequency between 33 kHz to 60 kHz and 130 kHz to 210 kHz. Adjusting the frequency allows you to change the R209 beamwidth and depth capabilities.
-
R309 Broadband 2-3 kW Transducer
Airmar R309 Broadband 2-3 kW Transducer Frequency Agility! Airmar’s Broadband R309 is different than the R209 because it operates at ANY frequency between 25 kHz to 45 kHz and 130 kHz to 210 kHz. Adjusting the frequency allows you to change the Airmar R309 beamwidth and depth capabilities.
-
M265 Chirp Broadband 1kW In-Hull Transducer
Airmar M265 C-Lx 1kW FM and Chirp Broadband In-Hull transducers represent the next generation of technology that will allow fishermen to unlock new secrets in fishfinding. Airmar M265 Chirp transducers are designed for use specifically with Broadband, CHIRP, FM, and Spread-Spectrum fishfinders.
-
R111 Chirp Broadband In-Hull Transducer
Airmar R111 2kW Chirp Broadband In-Hull Transducer CHIRP/Spread Spectrum sounders using Airmar broadband transducers can operate as a CHIRP fishfinder system. When Airmar’s new transducer is paired with a broadband fishfinder the result is 5 to 10 times greater sensitivity and performance than current fishfinder technology.
-
R109 Chirp Broadband 2kW Transducer
Airmar R109 C-LH 2kW FM and Chirp Broadband Thru-Hull transducers represent the next generation of technology that will allow fishermen to unlock new secrets in fishfinding. Airmar R109 transducers are designed for use specifically with Broadband, CHIRP, FM, and Spread-Spectrum fishfinders.
-
R509 Chirp Broadband 2-3kW Transducer
Airmar R509 C-Lx 2-3kW FM and Chirp Broadband Thru-Hull transducers represent the next generation of technology that will allow fishermen to unlock new secrets in fishfinding. Airmar R509C transducers are designed for use specifically with Broadband, CHIRP, FM, and Spread-Spectrum fishfinders.
-
R599 Chirp Broadband 2-3kW In-Hull Ducer
Airmar R599 C-Lx 2-3kW FM and Chirp Broadband In-Hull transducers represent the next generation of technology that will allow fishermen to unlock new secrets in fishfinding. Airmar R599 Chirp transducers are designed for use specifically with Broadband, CHIRP, FM, and Spread-Spectrum fishfinders.
-
Furuno Adapter Cable 8-10
Airmar Furuno Adapter Cable 8-10 3 ft. 8-pin adapter cable. Converts old style 8-pin to new style 10-pin.
-
Furuno Adapter Cable 10-8
Airmar Furuno Adapter Cable 10-8 3 ft. 10-pin adapter cable. Converts new style 10-pin to old style 8-pin.
-
Spare Paddlewheel Kit 33-113
Airmar Spare Paddlewheel Kit 33-113 paddlewheel, axle and 4 O-ring kit for B44V, B66V-VL, B744V-VL, B744VC, B744VCL, ST650, ST850, and Datamarine ASTX-20NTH.
