Blue Sea Systems, Blue Sea Systems
-
P12 Battery Charger - 12V DC 25A
The P12 Battery Charger can be coupled with an Automatic Charging Relay (ACR) to provide advanced charging at or away from the dock. When the P12 Battery Charger is operating, communication with the ACR isolates the batteries so the proper charge profile is applied to each battery. When the AC source is removed, and the engine is running, the ACR will automatically combine batteries to share the charge from the alternator and isolate the batteries when discharging.
-
P12 Battery Charger - 12V DC 40A
The P12 Battery Charger can be coupled with an Automatic Charging Relay (ACR) to provide advanced charging at or away from the dock. When the P12 Battery Charger is operating, communication with the ACR isolates the batteries so the proper charge profile is applied to each battery. When the AC source is removed, and the engine is running, the ACR will automatically combine batteries to share the charge from the alternator and isolate the batteries when discharging.
-
P12 Battery Charger LED Remote
LED IndicatorsCharging LED- Quick check for green light confirms chargingCharge Stage- Displays charging stageEqualize LED- Indicates the charger is currently in equalization modeFan Mode- Indicates charger's internal fan modeCharge Output- Displays the percentage of output current for each battery. Will also indicate maximum output setting when maximum output is adjusted to accommodate for AC source limitations.Alert- Icon LEDs provide warning and alert status for quick diagnosticsFour Control ButtonsFan- User adjustable settingsDim/ Alarm- Provides adjustment to brightness of LEDs on display as well as Silence function for alarms.Output- User adjustable charger output when AC source limitations exist that require lowering the AC current draw.Power- Places P12 Battery Charger into standby mode
-
Deckhand Dimmer - 24V DC 6A
Illuminated exit with adjustable time delayDigitally controls dimming of non-regulated LEDs, incandescent, and halogen lightsMemory for last settingProvides continuous voltage control from 0 to 100% of input voltageOffset mounting tabs allow dimmers to be mounted close togetherRetail package includes momentary (ON)-OFF-(ON) switch
-
Deckhand Dimmer - 12V DC 6A
Illuminated exit with adjustable time delayDigitally controls dimming of non-regulated LEDs, incandescent, and halogen lightsMemory for last settingProvides continuous voltage control from 0 to 100% of input voltageOffset mounting tabs allow dimmers to be mounted close togetherRetail package includes momentary (ON)-OFF-(ON) switch
-
Deckhand Dimmer - 12V DC 12A
Illuminated exit with adjustable time delayDigitally controls dimming of non-regulated LEDs, incandescent, and halogen lightsMemory for last settingProvides continuous voltage control from 0 to 100% of input voltageOffset mounting tabs allow dimmers to be mounted close togetherRetail package includes momentary (ON)-OFF-(ON) switch
-
Deckhand Dimmer - 12V DC 25A
Illuminated exit with adjustable time delayDigitally controls dimming of non-regulated LEDs, incandescent, and halogen lightsMemory for last settingProvides continuous voltage control from 0 to 100% of input voltageOffset mounting tabs allow dimmers to be mounted close togetherRetail package includes momentary (ON)-OFF-(ON) switch
-
Deckhand Dimmer - 24V DC 12A
Illuminated exit with adjustable time delayDigitally controls dimming of non-regulated LEDs, incandescent, and halogen lightsMemory for last settingProvides continuous voltage control from 0 to 100% of input voltageOffset mounting tabs allow dimmers to be mounted close togetherRetail package includes momentary (ON)-OFF-(ON) switch
-
Deckhand Dimmer - 24V DC 12A
Illuminated exit with adjustable time delayDigitally controls dimming of non-regulated LEDs, incandescent, and halogen lightsMemory for last settingProvides continuous voltage control from 0 to 100% of input voltageOffset mounting tabs allow dimmers to be mounted close togetherRetail package includes momentary (ON)-OFF-(ON) switch
-
Vessel Systems Monitor VSM 422
Three intuitive display modesFlexible case design offers three mounting optionsFully programmable legends and adjustable alarm functions can be customized to fit every boatIncluded in retail packagingâ AC 1Dhead unit, surface mount bezel, surface mount gasket, DC Current Shunt 8255, AC Current Transformer 8256, Battery Temperature Sensor 1820, connectors, and mounting screwsMonitors DC systemsâ AC 1Dvoltage, amperage, battery state of charge - amp hours remaining, time remaining, % charge, battery temperature (alarms for all values)Monitors AC systemsâ AC 1Dvoltage, amperage, watts, frequency (alarms for voltage, amperage, and frequency)Monitors tank levelsâ AC 1Dfuel, water, waste, (alarms for high level waste, low level fuel, and water)Monitors bilgeâ AC 1Dactive, cycle count, and duration (alarms for cycles and duration)
-
Fuel Level E-1/2-F
Gauge diameter: 2.00" (50.80mm)Bezel: Aluminum, water-tight faceWill fit panels up to 0.8" thickness
-
DC Digital Voltmeter - 0 to 60V DC
Displays voltage from 0 to 60 Volts3 levels of display brightnessSplashproof frontManual sleep mode blanks display for power conservationApplicable for 12, 24, 32, 36, and 42 Volt DC systems
-
DC Digital Ammeter - 500 to 500A
Displays amperage from -500 to +500 Amps3 levels of display brightnessSplashproof frontManual sleep mode blanks display for power conservationStandard meter operates in negative side of circuit only. Shunt Shifter required for positive side installation such as alternatorsIncludes 500 Amp shunt
-
AC Digital Voltmeter - 80 to 270V AC
Displays voltage from 80 to 270 Volts3 levels of display brightnessSplashproof frontManual sleep mode blanks display for power conservation
-
AC Digital Ammeter - 0 to 150A
Displays amperage from 0 to 150 Amps3 levels of display brightnessSplashproof frontIncludes current transformerManual sleep mode blanks display for power conservation
-
AC Digital Frequency Meter - 40 to 90 Hertz
Displays frequency from 40 to 90 Hertz3 levels of display brightnessSplashproof frontManual sleep mode blanks display for power conservation
-
AC Digital Multi-Function Meter with Alarm
Displays amperage from 0 to 150 AmpsDisplays voltage from 80 to 270 VoltsDisplays power from 0 to 35 KilowattsDisplays frequency from 40 to 90 HertzHigh and low voltage and high amperage alarms, both audio and visual3 levels of display brightnessProgrammable sleep mode blanks display for power conservationSplashproof frontIncludes current transformer
-
DC Digital Multi-Function Meter with Alarm
Displays amperage from -500 to +500 AmpsDisplays voltage from 0 to 60 Volts in 0.01 Volt incrementsHigh and low voltage, audio and visual alarmsStandard meter operates in negative side of circuit only. Shunt Shifter required for positive side installation such as alternators3 levels of display brightnessProgrammable sleep mode blanks display for power conservationSplashproof frontIncludes 500 Amp shunt
-
DC Digital Voltmeter with Alarm
Displays voltage from 0 to 60 VoltsHigh and low voltage audio and visual alarms3 levels of display brightnessProgrammable sleep mode blanks display for power conservationSplashproof frontApplicable for 12, 24, 32, 36, and 42 Volt DC systems
-
Mini Clamp Multimeter - AC/DC
Clamp allows measurement of AC and DC current in wires without disturbing the circuits or contacting live terminalsAuto range simplifies operation: 0.01-400 Amps, 0.001-600 VoltsAuto power-off selection - power turns off automatically after 10 minutes of non-useTrue RMS - required for accurate measurement of inverter outputLarge digital display makes reading measurements easyData hold - press "HOLD" button during measurement to lock reading valueTest leads included with meter
- 1
- 2