Batteries
-
BP-227 Li-ion Battery
ICOM BP-227 Li-ion battery for IC-M88.
-
BP-245N Li-ion Battery
ICOM BP-245N BATTERY PACK 7.4V/2000mAh Li-Ion battery pack. Provides 15–16 hours* operating time (approx.). Same as supplied.*(Tx (Hi): Rx: standby=5:5:90).
-
BP-251 Alkaline Battery Case
ICOM BP-251 alkaline battery case for M34 VHF radio. Holds 5 AAA batteries.
-
BP-252 LI-LON Battery
ICOM BP-252 LI-LON battery for M34 VHF radio. Replaces BP-241.
-
FNB-83 NI-MH Battery
Standard Horizon FNB-83 1400 mAh Ni-MH battery for HX270 and HX370.
-
FBA-25 Battery Tray
Standard Horizon FBA-25A battery tray for HX370 and HX500 Series.
-
FNB-V57IS Ni-Cd Safe Battery
Standard Horizon FNB-V57IS 1100 mAh Ni-Cd intrinsically safe battery pack for HX370SAS.
-
FNB-121LI Battery
Standard Horizon FNB-121LI 1150mAh Li-Ion Battery for HX-75x, HX-760 and HX-85x handheld VHF radios. Replaces the FNB-V99LI.
-
BP-224 Ni-Cad Battery
ICOM BP-224 Ni-Cad battery for M2, M32 and GM1600.
-
FNB-80LI Battery
Standard Horizon FNB-80LI 7.2 V 1100 mAh Li-ion battery for HX460 and HX471.
-
PRO INSTALLER DOUBLE POLE BATTERY SWITCH
Same industry standard mounting with On/Off operation. Used where positive and negative supplies must be isolated at the same time. SAFETY NOTE: BEP does not recommend this for switching house and start battery systems at the same time, for safety reasons. You may need to isolate your engine battery in an emergency, but not your house battery which typically powers the communications. For this application please use the new Dual Bank Control Switch (772-DBC) or one of BEP 19s battery switch clusters. Note: 770-DP is replacing 720-DPFeatures & Benefits: Industry standard footprint Three mounting options 13 surface, rear-panel and front-panel Compatible with metric and imperial mounting fasteners User friendly design Improved access for cables Removable knob for isolation/safety Includes back cover and three side panels for security and cable protection Designed to withstand harsh marine environments High temperature reinforced plastics
-
PRO INSTALLER
Now AvailableOnboard power demands continue to increase as boaters request the comforts of home on their boats. BEP looked at the common products used by electrical installers everyday and made significant improvements in design and construction to make them more robust and extend product life, provide flexibility to the builder or installer, and save valuable space onboard.Pro Installer modular assemblies are designed for fast, flexible installation in tight spaces, making it easy to 1Ccluster 1D products and reduce their footprints. The common interconnection height enables the use of solid link bars, to connect multiple Pro Installer products, ensuring the fastest installation, and the most compact mounting footprint.Like all BEP products, you can be assured of durable construction engineered specifically to handle the challenging marine environment with high-temperature, fiber-reinforced base material for strength and temperature resistance.All Pro Installer products include the following features: there is a common interconnection height, label recess on the cover, ability to 1Ccluster, 1D compact footprint, and stainless steel studs and nuts.
-
MARINE RATED BATTERY FUSE (MRBF)
Terminal Mount Heavy Duty Fuse Holder & cover Applications:Designed for the most demanding environment to provide high current protection within the tightest space constraints.Suitable circuit protection for DC Mains, inverter, windlass, bow & stern thrusters, alternator outputs, starter motor inputs and accessory circuits. This unit is weatherproof. Features: Weatherproof IP66 design Compact heavy duty protection Insulated cap to prevent short circuit Ignition Protected Easy installation Suitable for high capacity battery banks
-
Battery Charger and Power Supply, DCP2 (12V, 24V)
Using switch mode technology to ensure an extremely low ripple, the DCP2 is a safe choice both as a battery charger and/or a DC power supply.Furthermore high efficiency, automatically protections and low weight are key words in most applications.Features: Automatic and electronic protection featuresAutomatic restart after fault conditionsAutomatic output power derating for high ambient temperaturesGreen LED indication for aux. power connectedAdjustable output voltageNo moving parts 13 no maintenanceDin rail mountedType approvals from all major classification societies
-
Battery Charger, DBC-1
Tested and certified as a first grade quality unit with a robust aluminium housing and black plastic cover, the DBC-1 has a long and reliable product life and withstands years of everyday wear and tear.Using switch mode technology to reduce energy waste, the unit is also vibration-resistant and features dry contact alarm relay activation in cases of fault detection, as well as boost/equalisation for extended battery lifetime, and advanced overvoltage (transient) protection.Features: Automatic and electronic protection featuresAutomatic restart after fault conditionAlarm relayAutomatic output power derating for high ambient temperaturesLED indication of faults, boost charging and normal operationBoost modeAdjustable output voltageNo moving parts 13 no maintenanceType approvals from all major classification societies
-
BP234 Lithium Battery Pack 3300mAh
ICOM BP234 Lithium Battery Pack 3300mAh for GM1600 and GM1600K. High Capacity Lithium battery pack. Non-rechargeable 9.0V/3300 mAh
-
FBA-38 Battery Tray
Standard Horizon FBA-38 alkaline battery tray for HX750S HX760S and HX850S Series.
-
FNB-110LI Battery
Standard Horizon FNB-110LI Lithium-Ion battery for HX290.
-
FNB-V122LI Battery
Standard Horizon FNB-V122LI Lithium-Ion battery for HX300.
-
FBA-23 Battery Tray
Standard Horizon FBA-23 AA battery tray for HX460 and HX471 Series.
- 1
- 2