Sea Eagle, Accessories
- Synthesized Thermal Weather Facsimile Receiver- 8 inch wide high quality thermal printing- Automatic reception with start/stop control, optimum frequency selection, phase matching and speed/IOC selection- Timer programming for automatic recording up to 16 programs per week- Date and time are automatically printed when the APSS automatic stop signal is received
- Transducer tester- Echo Sounder tester- NMEA tester- Built-in rechargeable batteryThe ETT985A simple to use, reliable and accurate tester for most Echo Sounders. Preprogrammed with factory tests for Transducers, Echo Sounders and NMEA ports.This unit can be used in a stand-alone mode, or using a connection to a PC to give accurate results and even print/save a status report, this unit eliminates uncertainty of whether a failure is in the Transducer or in the Echo Sounder. An expensive mistake if you get it wrong!Features:Tester for Transducer of frequencies from 10 kHz to 1 MHzJust the tester: 22 Impedance, resistance and phase 22 Detection of resonant point and impedance at resonance 22 Preprogrammed integrity tests for SKIPPER transducers (and others)With software AC-ETT985: 22 Graph of impedance, conductance, phase and susceptance 22 Detection of resonance, anti-resonance, bandwidth and factory limit check 22 Save to .xls format and/or print out for service reports 22 Add your own transducer checks and limits (saved in tester for later use)Simulator for SKIPPER and other continuous wave Echo SoundersJust the tester: 22 Detect and measure pulses, frequency, strength, Vpp, width and period 22 Generate return pulses with fixed or tracking format, at depth up to 999.9 m 22 Simulate fish in the water columnWith software AC-ETT985: 22 Check results against factory settings or preset default values 22 Add your own Echo Sounder values and checksNMEA testerJust the tester: 22 Monitor NMEA lines, loop back signals from devices, send standard formats for GPS, gyro, Echo Sounders, Speed Logs etc. 22 Use the unit as a NMEA to RS232 converter or to USB with included converterWith software AC-ETT985: 22 Insert your own NMEA parameters (can be saved)Test the transducer against a preset set of parameters from the manufacturer. Then test the Echo Sounder and compare to an expected screen picture. This will test programmed limitations, noise levels, cabling and Transducer operation.If the problem is NMEA connections, then simply connect the tester to the NMEA port, using the provided test clips, and monitor the traffic. Alternatively you can loop the incoming signals to the output, and see if the signals appear on the sounder unit. The unit will send standard messages for the Echo Sounder, GPS, gyro, Speed Log, and more. It will allow wiring to be diagnosed. If all else fails, or if you wish to send commands or log data, the ETT985 can be used together with a PC as a simple NMEA converter.The ETT985 is provided with test cables, power supply and a USB converter, in a soft carry bag, ready to go! The tester can be purchased alone (part number: ETT985-SA) or with activation code (part number: ETT985-SASW) for the extra test functionality within the SKIPPER service software freely downloadable from www.skipper.no.This system is ideal for anyone performing service on Echo Sounders or as a low cost analyser for anyone interested in underwater transducers.
JB12 Junction Box
Main Functions:- A water resistant junction box for extending digital signal cables in speed logs.Applications:- EML224SX Log sensor 13 extension of sensor cable.- EML224N-XX 13 extension of cable from JB60N2 to display unit.- DL850T-XX 13 extension of cable from transceiver to display (not sensor cable)
Transducer Selector TS-104
A 4 to 1 transducer switcher allowing the user to select which transducer is to be shown on a single channel echosounder. The unit allows up to 4 transducers of the same frequency to be switched onto a single channel.